Description
Features:
- Heat Exchanger—Single-Wall 1-1/2" O.D. glass-coated (Vitraglas®) carbon steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of 2.7 Gal. The maximum supply temperature from the boiler must not exceed 250° F.
- Factory Installed Sediment Reducing Inlet Tube—Cold water inlet sediment reducing device helps prevent sediment build-up in the tank. Increases first-hour delivery of hot water while minimizing temperature build-up in the tank.
- Glass-lined Steel Tank —LAARS water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. The high silica lining provides a tough interior surface for our hot water tanks.
- Immersed Adjustable Honeywell Aquastat—Fast-acting immersion aquastat for automatic temperature control (adjustable from 80F to 160F).
- Supply and Return Connections—1" NPT female connections are located on the front for both the boiler collector supply and return.
- 2" Non-CFC Foam Insulation—Covers the side and top of the tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies, and jacket rigidity.
- Potable Water Connections—3/4" NPT factory installed accurate dielectric fittings extend water heater life and ease installation.
- Three Protective Aluminum Anode Rods—Provide added protection against corrosion for long, trouble-free service.
- Steel Tank—Heavy gauge steel automatically formed, rolled, and welded to assure a continuous seam for glass lining.
- T&P Relief Valve—Included.
- Brass Drain Valve.
- I=B=R Certified —These water heaters are rated by the Institute of Boiler and Radiation Manufacturers (I=B=R) to provide accurate performance data within the certification standards. The I=B=R rating is issued by the Hydronics Institute Division of GAMA and provides a recognized standard for proper comparison of hydronic appliances.
Specs
- Capacity: 75 Gallons
- Floor to Heater Top: 59"
- Jacket Diameter: 24"
- Floor to T&P Connection: 52-7/8"
- Floor to Water Connection: 59-3/4"
- Floor to Exchanger Outlet: 5-3/8"
- Floor to Exchanger Inlet: 27-1/2"
- Floor to Aquastat: 11-1/2"
