Description
The CMBE Booster is designed for domestic and commercial water supply, pressure boosting, irrigation and dewatering applications.
Features:
- Constant pressure via integrated speed control
- Compact design
- Robust, stainless steel design
- Easy installation
- Low energy consumption
- Dry-running protection
- Noise level below 55 dBA and even lower at controlled speed
| TECHNICAL | |
|---|---|
| Pump speed on which pump data is based | 3780 rpm |
| Rated flow | 10.6 US gpm |
| Rated head | 140.8 ft |
| Impellers | 5 |
| Primary shaft seal | AQQE |
| Approvals and markings | CE,CULUS |
| Curve tolerance | ISO9906:2012 3B |
| Model | A |
| Return valve | YES |
| Start pressure | Integrated Frequency converter |
| MATERIALS | |
|---|---|
| Pump housing | Stainless steel |
| DIN W.-Nr. 1.4301 | |
| AISI 304 | |
| Impeller | Stainless steel |
| DIN W.-Nr. 1.4301 | |
| AISI 304 | |
| Rubber | EPDM |
| INSTALLATION | |
|---|---|
| Maximum ambient temperature | 113 °F |
| Flange standard | INTERNAL NPT THREAD |
| Pump inlet | NPT 1 |
| Pump outlet | NPT 1 |
| LIQUID | |
|---|---|
| Pumped liquid | Water |
| Liquid temperature range | 32 .. 140 °F |
| Selected liquid temperature | 68 °F |
| Density | 62.29 lb/ft³ |
| ELECTRICAL DATA | |
|---|---|
| Rated power - P2 | 1.01 HP |
| Main frequency | 50 / 60 Hz |
| Rated voltage | 1 x 115 V |
| Maximum current consumption | 8 A |
| p max system | 145.04 psi |
| Rated speed | 360-4000 rpm |
| Enclosure class (IEC 34-5) | IP55 |
| Insulation class (IEC 85) | F |
| Type of cable plug | US 5-15 |
| Mains cable | 4.92 ft. |
The CMBE series is available in both 1x110-120V and 1x200-240V variants and uses energy efficient, permanent magnet motor technology, which provides unmatched reliability, quiet operation, and energy savings. Thanks to the integrated speed controller, the CMBE keeps a constant pressure in the pipe system. A pressure sensor monitoring discharge pressure will signal to the speed controller to change the motor speed to adapt the performance to the new situation.
Downloads:
* The manufacturer recommends using the Grundfos 98046408 MI 301 Go Remote for optimal setup and troubleshooting of this pump.
