Description
The Grundfos CME Booster is a compact booster system for water supply in domestic applications. The integrated speed controller enables the CME Booster to keep constant pressure in the pipe system. A pressure sensor monitoring changes in the water consumption will signal the speed controller to change the motor speed to adapt performance to the new state. The CME Booster is very easy to install. When the pipework has been installed, it is all a matter of plugging the unit into a socket, and the system is operational.
Features:
- Constant pressure via integrated speed control
- Compact design
- Robust, stainless steel design
- Easy installation
- Low energy consumption
- Dry-running protection
- Noise level below 55 dBA and even lower at a controlled speed
Specs:
Liquid:
Pumped liquid: Water
Liquid temperature range: 32 .. 140 °F
Selected liquid temperature: 68 °F
Density: 62.29 lb/ft³
Technical:
Rated flow: 18.5 US GPM
Rated head: 74.81 ft
Primary shaft seal: AQQE
Approvals and markings: CE, CULUS
Curve tolerance: ISO9906:2012 3B
Return valve: YES
Materials
Pump Housing: Stainless SteelImpeller: Stainless Steel
Rubber: EPDM
Installation:
Electrical Data:
Rated power - P2: 1.01 HP
Main frequency: 50 / 60 Hz
Rated voltage: 1 x 115 V
Maximum current consumption: 8 A
Rated speed: 360-4000 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Type of cable plug: US 5-15
Mains cable: 4.92 ft
Tank:
Tank volume: 0.528 gal
