Grundfos CMBE 5-31 1.5 HP Booster Pump 200-240V

The Grundfos CME Booster is a compact booster system for water supply in domestic applications. The integrated speed controller enables the CME Booster to keep constant pressure in the pipe system. A pressure sensor monitoring changes in the water consumption will signal the speed controller to change the motor speed to adapt performance to the new state. The CME Booster is very easy to install. When the pipework has been installed, it is all a matter of plugging the unit into a socket, and the system is operational. The CME Booster consists of:

1. CME pump with integrated frequency converter
2. 5-way valve
3. Expansion tank
4. Pressure gauge
5. Manometer

Features:

• Constant pressure, integrated speed control
• compact
• robust, stainless steel
• easy installation
• dry run protection

Specs:

Liquid:

Pumped liquid: Water
Liquid temperature range: 32 .. 140 °F
Selected liquid temperature: 68 °F
Density: 62.29 lb/ft³

Technical:

Installation:

Electrical Data:

Rated power - P2: 1.5 HP
Main frequency: 50 / 60 Hz
Rated voltage: 1 x 200-240 V
Maximum current consumption:  6.70-5.60 A
Rated speed: 360-4000 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Type of cable plug: NONE
Mains cable: NO CABLE m

Tank:

Tank volume: 0.528 gal

Manuals:

Specification Sheet

* The manufacturer recommends using the Grundfos 98046408 MI 301 Go Remote for optimal setup and troubleshooting of this pump.