Description
16 oz. Penetrating & Cleaning Oil
Black Swan Penetrating & Cleaning Oil penetrates and loosens rust, tar, dirt, carbon and corrosion, even on stubborn, rusted bolts. Reduces the tugging and pounding sometimes required to loosen screws and bolts. Only a few drops are needed. Accurate pinpoint control can be achieved with the extension tube which is included with each aerosol. The low surface tension permits the oil to creep into tight spaces and along threaded fasteners.
Penetrating & Cleaning Oil contains no acid. Product is also effective against salt water corrosion.
Directions
Hold can 12 - 14" from surface to be sprayed. Vary pressure for density of coating. Keep at room temperature for best operation.
Specifications
Color(s): Dark Amber
Odor: Hydrocarbon
Specific Gravity (@70°F): 0.70
Viscosity (@70°F): 27±SEC/#1 Zahn Cup
Flash Point (Aerosol): -50°F T.C.C.
Boiling Point (Concentrate): 314-392°F
Minimum Sprayability: +50°F
Non-Volatile (Aerosol, % by Volume): 24%
Vapor Pressure (@70°F): 50-60-psig
Spray Pattern (@70°F): Stream
Spray Rate (10 s @ 70°F): 8-10 g/10s
VOC Content (w/w): 76%
Caution
Contains petroleum distillates. If swallowed do not induce vomiting. Call physician. Exposure to heat may cause release of contents from top of rim of can. Do not store in direct heat., sunlight or temperatures above 120°F. Do not puncture or incinerate can. Use only as directed. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Keep out of reach of children.
