Description
The 912SD Multi poise Condensing Gas Furnace features a single-stage gas valve and ECM blower motor. The fixed-speed, constant torque (FCT) ECM blower motor is at the heart of the electrical efficiency provided by this furnace. With an Annual Fuel Utilization Efficiency (AFUE) of 92.1%, the Legacy single-stage gas furnace provides added savings over standard, non-condensing gas furnaces. This Legacy Gas Furnace features 4-way multipoise installation flexibility and is available in eight model sizes. The 912SD can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. A Bryant Legacy thermostat and Legacy Air Conditioner or Heat Pump can be used to form a complete Legacy Series System. Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. It can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. All sizes are design certified in Canada. All sizes are design approved for use in Manufactured Housing (Mobile Home) applications when used with a factory-approved MH accessory kit.
Features
Performance
- Fixed-Speeds, Constant Torque (FCT) Ecm Blower Motor For Electrically Efficient Operation All Year Long In Heating, Cooling, And Continuous Fan Operation
- Single-Speed Inducer Motor, And Single-Stage Gas Valve
- Silicon Nitride Perfect Light Hot Surface Igniter.
- Adjustable Blower Speed For Heating And Cooling.
- Aluminized-Steel Primary Heat Exchanger.
- Stainless-Steel Condensing Secondary Heat Exchanger.
Installation Flexibility
- 4-Way Multi poise Design For Upflow, Downflow, Or Horizontal Installation, With Unique Vent Elbow For 12 Different Venting Options, Including Optional Venting Through-The-Cabinet Downflow Venting Capability.
- Factory-Configured Ready For Upflow Applications.
- Ideal Height 35" (889 Mm) Cabinet: Short Enough For Taller Coils, But Still Allows Enough Room For Service.
- Direct-Vent/Sealed Combustion, Single-Pipe Venting, Or Ventilated Combustion Air.
Applications
- Approved For Manufactured Housing/Mobile Home Applications With Mh Accessory Kit.
- Propane Convertible With Gas Conversion Accessory.
Certifications
- All Sizes Meet Energy Star South Regional Standards.
- Cabinet Air Leakage Less Than 2.0% At 1.0 In. W.C. And Cabinet Air Leakage Less Than 1.4% At 0.5 In. W.C. When Tested In Accordance With Ashrae Standard 193
All Sizes Meet 40 Ng/J Nox Emissions. Can Be Installed In Air Quality Management Districts With A 40 Ng/J Nox Emissions Requirement
| AFUE: | 92% |
| Air Flow: | Multi-Position |
| BTU Input: | 60000 |
| BTU Output: | 56000 |
| Blower Motor HP: | 1/2 HP |
| Blower Motor RPM: | 600-1200 |
| Blower Motor Speeds: | 5 (Five) |
| Blower Motor Type: | ECM (Electronically Commutated Motor) |
| Blower Wheel: | 11" x 7" |
| Brand: | Bryant |
| CFM: | 1100 |
| Cabinet Width: | 14.2 |
| Circuit Breaker - Max Amps: | 15 |
| Color: | Gray |
| Country Of Origin: | USA |
| Cycle/Hertz: | 60 Hz |
| ETL Listed: | No |
| Energy Star Rated: | No |
| FER Compliant: | Yes |
| Filter Size: | 16" x 25" x 3/4" Side Return Filter; 14" x 25" x 3/4" Bottom Return Filter |
| Fuel Type: | Natural Gas or LP |
| Full Load Amps: | 6.4 |
| Gas Connection: | 1/2" [12.7 mm] N.P.T. |
| Ignition Type: | Hot Surface (HSI) |
| Includes Filter Rack: | No |
| Phase: | Single |
| Product Family: | 912S |
| Prop 65: | Yes |
| UL Listed: | No |
| Voltage: | 115 VAC |
Downloads
Bryant Gas Furnace Comparison Flyer
Legacy Line 90+% Gas Furnaces consumer brochure (FER Compliant)
