Description
EasyHeat™ AHB automatic electric water pipe heating cable is a preassembled and ready-to-install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.
Features:
- Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
- Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
- Cables are rated at 7 Watts per 1 ft (0.30 m)
- Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
- Plugs into a standard 120 Vac outlet, must be GFCI protected
- Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
- Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
- Pre-assembled and ready to install
- Integral thermostat saves energy by powering the cable only when needed
Specifications:
• Length:
• Voltage Rating: 120 Vac
• Certifications:
UL Listed to Canadian Safety Standards and CSA Certified when used in accordance with instructions on water filled metal or plastic pipes
• Accessories:
It is recommended to use EasyHeat™ HCA application tape or good quality electrical tape with a minimum +176 °F (+80 °C) temperature rating to secure heating cable(s) to pipes. See EasyHeat™ Pipe Tracing Accessories
