Available 9am - 5pm EST
Description
The JL3PC pipe temperature wireless clamps feature patent pending Rapid Rail™ Sensor Technology that uses electrically conductive pipe to complete the circuit so readings stabilize in 3 seconds and are not affected by ambient air. One beep with a slow green blinking light indicates a closed circuit. If the pipe is corroded the circuit will be open and will not read temperature. The clamp will indicate the open loop with a double beep and rapid blinking light. Simply clean the pipe to enable the circuit to be closed and allow fast readings with +/- 1° F accuracy.
Features
- LED and beep indicate accurate connection
- Ambient air conditions do not affect measurements
- Narrow jaw connects in tight spaces
- Water resistant
Specs
- Pipe Contact Surface Compatibility: Electrically conductive
- Pipe Size Compatibility: 1/4″ to 1 3/8″ (6.4mm to 34.9mm) OD
- Sensor Type: Rapid Rail thermocouple (nickel chromium / nickel aluminum)
- Measurement Feedback: Beeper and LED
- Measurement Range: -50°F to 257°F (-46°C to 125°C)
- Plastic body and wire insulation are designed to withstand a maximum continuous temperature of 257°F (125°C).
- Stabilization Time: 3 seconds typical
- Accuracy: ±1.0°F (±0.6°C)*
- Battery Type: 2 x AAA, NEDA 24A, IEC LR03
- Battery Life: 150 hours typical alkaline – LED blinks red when battery replacement is needed
- Auto Power Off: 2 hours (APO can be disabled)
- Wireless Range: 1000 feet (305 meters) line of sight. Obstructions affect distance.
- Radio Frequency: 2.4 GHz
- Operating Environment: -4°F to 122°F (-20°C to 50°C) at <75% RH
- Storage Temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with batteries removed)
- Temperature Coefficient: 0.1 x (specified accuracy) per 1.8°F (32°F to 64°F, 82°F to 122°F), per 1°C (0°C to 18°C, 28°C to 50°C)
- Weight: 0.33 lbs
- Water Resistant: Designed to IP55
What's Included
- Job Link Premium Pipe Clamp Probe
- 2 x AAA Batteries
- Emery Cloth for Cleaning Pipes
- Operator’s Manual
- 1 Year Limited Warranty
