Description
General Pipe Cleaners, Mrp-C, Drain Maintenance, Mini-Rooter Pro, Power Tools, Drum Machines.-This inexpensive, light weight machine has lots of time-saving features. For instance, you can remove the drum in seconds for more portability or to switch to a different diameter cable – with no mess and no lost time. A distributor tube inside the drum allows you to feed cable in and out without chucking and releasing the cable every few feet – so you finish quicker. An optional Power Cable Feed drives and retracts the cable at up to 16 feet per minute. The drum carries up to 75 ft of 3/8” cable to clear 2” to 3” lines, or 1/2” cable for heavier work in 4” lines. For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables. Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley.
- Clears 1-1/4″ to 3″ lines and most 4″ lines.
- Holds 75 ft. of 3/8″ or 50 ft. of 1/2″ Flexicore®
- Built in 6” wheels for easy transport, and folding handle for compact storage.
- 1/3 hp motor with reverse switch and pneumatic foot pedal.
- Drum removes in seconds for more portability.
- Optional J-Drum holds 50 ft. of 1/4″ or 5/16″ cables for small 1-1/4” to 2” lines.
- Optional Power Cable Feed drives and retrieves cable at up to 16 ft./min.
- Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
- Made in U.S.A
- The Mini-Rooter Protrade will clear your kitchen, bath, and laundry drains with ease.
- Folding handle allows for compact storage in your truck, car, garage, or closet.
- Weight: 43 lbs. (19.5 kg) without cable.
- Dimensions: 20” D x 16” W x 38” H (20” H with handle folded) (51 cm x 41 cm x 96 cm – 51 cm)
- Drum: Capacity of 75 ft. x 3/8” or 1/2” Flexicore cable. Integral distributor tube. Quickly removable from frame.
- J-Drum: Capacity of 50 ft. of 1/4” or 5/16” Flexicore cable.
- Wheels: 6” semi-pneumatic tires.
- Folding Handle: Reduces storage space.
- Cutter Set: MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2” Side Cutter Blades. Other cutters available.
- Motor: 1/3 hp, with forward-off-reverse switch, spring-loaded mounting for proper belt tension.
- Load Speed: 165 rpm
- Belt Guard: High impact plastic
- Power Cable Feed: (Optional) Drives 3/8” and 1/2” cables. For smoother performance, switch to the XP drum with inner drum cage.
- Foot Pedal: Leaves operator’s hands free to control cable. Uses air pressure, so there’s no electrical contact between pedal and motor.
- Power Cord: 10 ft. 3-wire vinyl covered with molded plug. In-line ground fault circuit interrupter.
- Leather Gloves: With double-reinforced palm, for hand protection when guiding cable.