Available 9am - 5pm EST
Description
Features
- Product Features:
- Certified to ANSI Z21.13/CSA 4.9 Gas-fired Boiler Standard
- SA-312 Tp. 304L Stainless Steel Water Tube Heat Exchanger
- ASME "H" stamped boiler, designed and constructed in compliance with the ASME Boiler and Pressure Vessel Code Section IV
- Maximum operating pressure 55 psi
- Wall mounted
- Zero clearance to combustibles (clearances required for service)
- Modulating burner, 9:1 turndown ratio
- Certified as Direct Vent (sealed combustion) or for use with indoor combustion air
- Sealed cabinet
- High energy ignition transformer (spark ignition)
- Built-in water pressure bypass (guarantees minimum water flow)
- Low water pressure switch
- Integrated ECM boiler circulator
- Integrated 3-way valve (diverts between DHW & CH demands)
- Integrated condensate trap
- On / Off button
- Two 120 VAC outputs for external circulators (DHW/CH)
- DHW zone input (tank thermostat or sensor)
- CH zone input x 2 (room sensor or end-switch)
- Outdoor temperature sensor input
- WiFi remote connectivity embedded
Specs
Minimum / Maximum Input (Btu/Hr): 13,200 / 120,000
AFUE: 95%
Heating Capacity (MBH): 111
Net AHRI Rating, Water (MBH): 97
Power Supply: 120V, 60 Hz, less than 12A
Gas Connection, NPT: 3/4” (Male)
AFUE: 95%
Heating Capacity (MBH): 111
Net AHRI Rating, Water (MBH): 97
Power Supply: 120V, 60 Hz, less than 12A
Gas Connection, NPT: 3/4” (Male)
Installation type: Indoor, Wall Hung, Fully Condensing
