Description
The full line of State Modulating Ultra Force High-Efficiency Power Vent condensing water heaters has been designed to provide years of dependable service and feature industry-leading technology. This model provides 199,900 Btu/h, and it delivers thermal efficiencies of 97%. The unique helical coil heat exchanger limits weld joints for optimal service life while maximizing heat transfer. Modulating Ultra Force High-Efficiency Power Vent is an industry leader in high-efficiency commercial water heating. The current modulating models adjust the firing rate to the specific demand, further increasing efficiency and money savings.
Features
- Intelligent Control System With Touch Screen Display And Icomm Connectivity Onboard
- Exclusive State designed color touch display control system Provides detailed water heater status information
- Precise temperature control adjustable from 90 to 180 degrees
- Built-in diagnostics
- Run history information
- Comes with iCOMM Wi-Fi connectivity onboard. Remotely monitor and adjust the water heater via the State app.
- Submerged Combustion Chamber, With Helical Heat Exchanger Coil Positioned in the center of the tank, surrounded by water to eliminate radiant heat loss from the chamber virtually
- Direct spark ignition
- Spiral heat exchanger keeps hot burner gases swirling, and uses centrifugal force to maximize the efficiency of heat transfer to the water in the tank
- Spiral heat exchanger reduces lime scale from forming on water-side surfaces, which maintains energy efficiency over time
- Powered Anodes Standard On All Models Provides long-lasting tank protection in varying water conditions
- Powered anodes are non-sacrificial
- Automatically adjusts output needed to protect the tank adequately
- Permaglas Ultra Coat Glass Lining Glass coating is applied using a liquid slush coating technique to ensure uniform coating
- Heat exchanger coil is glassed both externally and internally for optimum protection
- Mechanical Venting Versatility Conventional power venting or direct venting
- Vents vertically or through a sidewall
- Front-located exhaust and condensate connections allow for easy installation and access
- Vents with low-cost PVC Schedule 40 intake and exhaust pipe. Approved for optional CPVC Schedule 40, Polypropylene, and AL29-4C stainless steel vent materials
- Direct-vent intake and exhaust pipe can terminate separately outside the building or through a single opening, using concentric vent assembly
- Canadian installations require ULC S636 PVC/ CPVC, ULC S636 Polypropylene and AL29-4C stainless steel pipe for intake and exhaust
- High-Efficiency Modulating Premix Powered Burner Down-fired pre-mix burner provides optimum efficiency and quiet operation
- Top-mounted burner position prevents condensation from affecting burner operation
- Space-Saving Design For Installation Flexibility Easy-to-remove top cover for convenient access to serviceable parts
- 0˝ installation clearances on sides and rear, 1-1/2˝ installation clearance on top
- Handhole cleanout allows easy access to the tank interior for cleaning
- 0˝ clearance to combustibles, approved for installation on combustible floors.
