Description
The 007e is a high-efficiency wet rotor circulator with an ECM permanent magnet motor. Its ECM performance is equivalent to the legendary 007 circulator. It is ideal for hydronic systems zoned with circulators or zone valves or used on potable water systems for domestic water recirculation. The 007e is not suitable for chilled water systems.
Features
• 10’ Shut-off head, 16 gpm max flow
• ECM performance equivalent to the legendary 007 circulator
• High-efficiency ECM motor usesup to 85% less electricity
• SureStart automatic unblocking and air purging mode
• BIO Barrier protects pump from system contaminants (Cast Iron only)
• Green Mode active system monitoring and automatic power optimization
• Nut-grabber feature on flanges for easier fit-up
• Dual electrical knockouts, 6” stranded wire leads included for easy wiring
• Integral Flow Check (IFC) included
• Double insulated — No ground wire required
• Whisper quiet operation
• Cast Iron models available with standard or universal flange
Specs
• Max. Flow: 16 gpm
• Max. Operating Pressure (Cast Iron): 125 psi (8.6 bar)
• Max. Water Temp: 230°F (110°C)
• Min. Water Temp: 36°F (2°C)
• Voltage: 120V, 60 Hz
• Ph: 1
• Max. Operating Power: 44W
• Max. AMP Rating: 0.54
• Cast iron casing suitable for closed loop systems only
• Not suitable for chilled water
• Taco circulator pumps are for indoor use only
• Acceptable for use with water or maximum of 50% water/glycol solution
