Description
UPS 32-160 F B
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.
In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. The pump is characterized by:
- 3 speed motor.
- Ceramic radial bearings.
- Carbon axial bearing.
- Stainless steel rotor can, bearing plate and rotor cladding.
- Aluminium alloy stator housing.
- Bronze pump housing.
- Stator with built-in thermal switch.
The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor.The motor is a 1-phase motor.
Controls:
Relay: with relay
Liquid:
Pumped liquid: Water
Liquid temperature range: 14 .. 248 °F
Selected liquid temperature: 140 °F
Density: 61.35 lb/ft³
Technical:
Approvals on nameplate: CUL
Materials:
Pump housing: Bronze
DIN W.-Nr. 2.1176.01
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 30
Installation:
Maximum operating pressure: 145.04 psi
Flange standard: USA Oval
Pipe connection: GF 40/43
Pressure stage: 145 psi
Port-to-port length: 13 1/2 i
Electrical data:
Power input in speed 1: 0.7443 HP
Power input in speed 2: 600 W
Max. power input: 625 W
Main frequency: 60 Hz
Rated voltage: 1 x 115 V
Current in speed 1: 5.5 A
Current in speed 2: 5.8 A
Current in speed 3: 5.8 A
Cos phi in speed 1: 0.88
Cos phi in speed 2: 0.9
Cos phi: 0.94
Capacitor size - run: 60 µF/250 V
Enclosure class (IEC 34-5): X4D
Insulation class (IEC 85): H
