Hydrolevel

Hydrolevel 45-1100 Low Water Cut-Off For Residential Gas Water Boilers Interrupts power immediately in a low water condition. Automatically restarts burner on return of water level. Features test...

Upon a feed signal from low water cut-off, the VXT feeder delays (from 30 seconds to 10 minutes) to allow condensate to return to boiler. If make-upwater is required after the delay period, the VXT...

The Safgard FS200 Flow Switch is used to start or stop electrically operated equipment such as burners, pumps or alarms by detecting liquid flow through piping. It is designed for use in water...

  Downloads Safgard 500/600/700 Series Installation Sheet

Interrupts power immediately in a low water condition. Burner circuit locks-out if water remains below probe for 30 seconds. Manual reset will not trip due to power failures. Test button checks...

Interrupts power immediately in a low water condition. Burner circuit locks-out if water remains below probe for 30 seconds. Manual reset will not trip due to power failures. Test button checks...

Compact low water cut-off for wall hung and space constrained applications. Interrupts power immediately in low water condition. Manual reset required after 30 seconds. Will not trip out on power...

Compact low water cut-off for wall hung and space constrained applications. Interrupts power immediately in low water condition. Manual reset required after 30 seconds. Will not trip out on power...

Upon a feed signal from low water cut-off, the VXT feeder delays (from 30 seconds to 10 minutes) to allow condensate to return to boiler. If make-upwater is required after the delay period, the VXT...