Description
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.
In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible.
The pump is characterized by:
- 3-speed motor.
- Ceramic radial bearings.
- Carbon axial bearing.
- Stainless steel rotor can, bearing plate, and rotor cladding.
- Aluminium alloy stator housing.
- Cast iron pump housing.
- Stator with built-in thermal switch.
The motor is a 3-phase motor.
The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor.
Suitable for
- HVAC: Air Conditioning
- HVAC: Heating
- Plumbing: Hot Water Recirculation
- Residential heating
- District cooling
- District heating
- Industrial heating
Specs:
Technical
Speed Number: 3
Head max: 52.5 ft
Approvals on the nameplate: CUL
Model: C
Materials
Pump Housing: Cast iron
Impeller: Stainless Steel
Installation
Range of ambient temperature: 32 .. 104 °F
Maximum operating pressure: 145.04 psi
Flange standard: USA
Type of connection: F
Pipe connection: GF 50
Pressure stage: 145 psi
Port-to-port length: 14 in
Liquid
Pumped Liquid: Water
Liquid Temperature Range: 14 .. 248 °F
Selected Liquid Temperature: 140 °F
Density: 61.35 lb/ft³
Electrical data
Power input in speed 1: 1.274 HP
Power input in speed 2: 1000 W
Max. power input: 1300 W
Main frequency: 60 Hz
Rated voltage: 3 x 208-230 V
Current in speed: 1 2.75 A
Current in speed: 2 3 A
Current in speed: 3 4 A
Cos phi in speed: 1 0.87
Cos phi in speed: 2 0.84
Cos phi: 0,82
