Description
Aquatherm 2027200002 8" SDR17.6 Butt Fusion End Cap
These fittings can be used with either the aquatherm green pipe® or aquatherm blue pipe® systems, but are all molded from the green fusiolen® material. The SDR of the fittings must match the SDR of the pipe.
All Aquatherm piping products are made from the same reliable polypropylene material and are engineered to be heat fused together. Since pipes and fittings come in sizes ranging from ½” to 24” in diameter, the fusion process, equipment required and installation time will vary, but the principles of heat fusion remain the same.
For a proper heat fusion connection, the two surfaces being fused are heated to a melting temperature, pressed together and allowed to cool under pressure. This process allows the same reliable polypropylene material chains to re-form as one, joining the pieces together without the need for glues, solders, gaskets or other foreign materials. By eliminating the foreign materials in the connection, heat fusion removes the most likely source of leaks and failures. The fused portion of the pipe also retains its flexibility and resistance to impact, making the connection easier and safer to prefabricate and transport. In short, a properly fused joint behaves as if it were manufactured that way. There are several methods of fusion used in joining Aquatherm pipes.
Each of these methods, if properly executed, will provide a connection that is stronger than the pipe itself. Completion of the Aquatherm pressure test will help verify the integrity of the connections and drastically reduce the risk of failure due to improper installation. Aquatherm’s heat fusion training courses are designed to help installers know when to employ each of these different methods and to become skilled in using them.
Butt Fusion
Butt fusion (or butt welding) is used for pipe and fittings from 6” to 24” in diameter. Butt fusion can also be used in conjunction with socket fusion on 4” pipe (SDR 9, 11 and 17.6 only). Butt fusion involves planing the ends of the pipe smooth, pressing them against a heating plate and then pressing them together to cool. This allows larger sizes of pipe to be assembled without the need for additional couplings. Butt fusion fittings are either made from the pipe itself, or to the same OD as the pipe, so they can be fused directly to the face of the pipe.Sizes
- 6" - 24"