Description
FTXL boilers have a top-mounted, micro-metal fiber burner, with a blower/gas valve assembly that drives heat energy downward, through stainless steel fire tubes, with exhaust venting through the bottom of the unit. With up to 10:1 modulation turn-down, the burner automatically changes its firing rate as building heat loads vary. An FTX1000 fires at its maximum 999,000 Btu/hr rate when heat load is highest, then gradually “turns down” to as low as 10% (99,900 Btu/hr) as load decreases. A modulating system runs smoothly and efficiently, without frequent on/off cycling.
Features
- 98.3% Thermal Efficiency
- Modulating Burner with 10:1 Turn-down
- Stainless Steel Fire Tube Heat Exchanger
- Vertical and Horizontal Direct Vent
- Smart System Control
- On/Off Switch
- Adjustable High Limit with Manual Reset
- Automatic Reset High Limit
- Manual Reset Low Water Cutoff
- Flue Temperature Sensor
- Low Air Pressure Switch
- Temperature and Pressure Gauge
- Condensate Trap
- Zero Service Clearance
Specs
- Min Btu/Hr (MBH): 9.99
- Max Btu/Hr (MBH): 999
- Gross Output (MBH): 982
- Net AHRI Rating Water (MBH): 854
- Comb. Efficiency (%): 99.0
- Thermial Efficiency (%): 98.3
- Flow(GPM) Min: 30 Max: 150
- Turn-down: 10:1
- HEX Water Volume (Gal): 19
- Water Connection: 2-1/2
- Vent Size: 6
- Air Inlet: 6
- Gas Connection: 1-1/4
- Ship Weight (lb): 670
