Description
The Sanicondens Best Flat is a 2 in 1 condensate pump used to neutralize and pump condensate from condensing boilers, HVAC systems, water heater systems, etc. It is one of the most powerful and quiet condensate pumps on the market with standard features that no competitor can match. The Sanicondens Best Flat. The Sanicondens Best Flat is a low profile pump used to neutralize and pump condensate from condensing boilers, HVAC systems, water heater systems, etc. The Sanicondens Best Flat will pump condensate waste up to 15 feet in height and/or 150 feet away from a soil stack.
Features
- Discharges the condensate waste through a 3/8” vinyl tube. A non-return valve is
included on the discharge connection provided with the system. - Comes with provisions for a ready-to-wire connection to an external overflow switch
that will shut down the appliance or alert the consumer in the event of overflow. It
also includes all necessary hardware for ease of installation; 20 Ft of vinyl tubing, inlet
adapter, discharge adapter. - Discharges condensate from a condensing boiler or other condensate producing fixtures.
The condensate will drain into the system via a side inlet or through a couple of inlets
on top of the enclosure. - Comes equipped with a built-in neutralizer to raise pH levels for harsh HVAC
applications. Neutralizing granules come included with the condensate pump. Will
neutralize condensate from appliances up to 500,000 BTU/ hour input.
Specs
Max. horizontal discharge: 15 ft
Max. vertical discharge: 150 ft
Voltage: 120 V
Frequency: 60 Hz
Amperage: 1.5 Amps (Max)
Motor: 1/30 HP oil-filled thermally protected motor
Operating temperature: 160°F Max
Discharge pipe diameter: 3 ⁄ 8 ”
Discharge rate at 15 ft: 30 GPH
Discharge rate at 3 ft: 86 GPH
Normal running time: 3-5 seconds (Short bursts)
Capacity: 0.9 gallons
Inlets diameters: 1” (top), 1” (side)
Type of activation: Float/microswitch
Certifying agencies: CSA (IPC, NSPC)
Boiler Capacity up to (BTU/hr): 500 000
Downoads
